- .nams-info/
- Cray_GigaRing_Paper.ps
Last modified 21:04:00, 7 Dec 1995 - 140.48828125K - PostScript
- Cray_GigaRing_Presentation.ps
Last modified 21:05:00, 7 Dec 1995 - 148.296875K - PostScript
- HNF_Bibliography_940720.ps
Last modified 22:36:00, 1 Jun 1995 - 95.9K - PostScript
- HNF_Bibliography_940906.ps
Last modified 22:36:00, 1 Jun 1995 - 95.3K - PostScript
- README
Last modified 22:33:00, 1 Jun 1995 - 3.4K - text
README from FTP archives of ANSI X3T11 HIPPI comittee.
- draft-miller-hippimib-01.ps
Last modified 22:34:00, 1 Jun 1995 - 52.7K - PostScript
- hippi-6400-annex_0.1.ps
Last modified 16:31:00, 6 May 1996 - 164.39453125K - PostScript
- High-Performance Parallel Interface - 6400 Mbit/s Physical
Layer (HIPPI-6400-PH)
Last modified 15:46:00, 5 Mar 1996 - 118.25K - Portable Document Format
4th March 1996. 28 pages.
Abstract: This standard specifies a physical-level, point-to-point,
full-duplex, link interface for transmitting digital data at
6400 Mbit/s over parallel copper cables across distances of
TBD m, or over parallel fiber-optic cables across distances
of TBD m. Small fixed-size micro-packets provide an
efficient, low-latency, structure for small messages, and a
building block for large messages. Services are provided for
transporting data streams specified by HIPPI-PH, ANSI
X3.183-1991, which is limited to 25 m distances, and 800 or
1600 Mbit/s data rates. NOTE: This is an internal working
document of X3T11, a Technical Committee of Accredited
Standards Committee X3. As such, this is not a completed
standard. The contents are actively being modified by X3T11.
This document is made available for review and comment only.
Author: Carl Zeitler (zeitler@ausvm6.vnet.ibm.com), IBM Corporation, MS 9440, 11400 Burnet Road,
Austin, TX 78758, USA; Tel: +1 512 838-1797; FAX: +1 512 838-3822
- hippi-6400-ph_0.15.ps
Last modified 15:47:00, 5 Mar 1996 - 293.580078125K - PostScript
- High-Performance Parallel Interface - 6400 Mbit/s Physical
Layer (HIPPI-6400-PH)
Last modified 12:09:00, 11 Apr 1996 - 137.125K - Portable Document Format
5th April 1996. 32 pages.
Abstract: This standard specifies a physical-level, point-to-point,
full-duplex, link interface for transmitting digital data at
6400 Mbit/s over parallel copper cables across distances of
TBD m, or over parallel fiber-optic cables across distances
of TBD m. Small fixed-size micro-packets provide an
efficient, low-latency, structure for small messages, and a
building block for large messages. Services are provided for
transporting data streams specified by HIPPI-PH, ANSI
X3.183-1991, which is limited to 25 m distances, and 800 or
1600 Mbit/s data rates. NOTE: This is an internal working
document of X3T11, a Technical Committee of Accredited
Standards Committee X3. As such, this is not a completed
standard. The contents are actively being modified by X3T11.
This document is made available for review and comment only.
Author: Carl Zeitler (zeitler@ausvm6.vnet.ibm.com), IBM Corporation, MS 9440, 11400 Burnet Road,
Austin, TX 78758, USA; Tel: +1 512 838-1797; FAX: +1 512 838-3822
- hippi-6400-ph_0.2.ps
Last modified 12:09:00, 11 Apr 1996 - 349.98828125K - PostScript
- High-Performance Parallel Interface - Mapping to Asynchronous
Transfer Mode (HIPPI-ATM)
Last modified 01:29:00, 19 Feb 1996 - 90.5K - Portable Document Format
Version 1.6. NOTE: This is an internal working document
of X3T11, a Technical Committee of Accredited Standards
Committee X3. As such, this is not a completed standard.
The contents are actively being modified by X3T11. This
document is made available for review and comment only.
Abstract: This standard defines the frame formats and protocol
definitions for encapsulation of High Performance Parallel
Interface - Mechanical, Electrical, and Signalling Protocol
Specification (HIPPI-PH) packets for transfer over
Asynchronous Transfer Mode (ATM) equipment, or for use with
other media. An informative annex describes an IP Router for
use between HIPPI and ATM systems.
Author: Carl Zeitler (zeitler@ausvm6.vnet.ibm.com), IBM Corporation, MS 9440, 11400 Burnet Road,
Austin, TX 78758, USA; Tel: +1 512 838-1797; FAX: +1 512 838-3822
- hippi-atm_1.6.ps
Last modified 01:29:00, 19 Feb 1996 - 262.9248046875K - PostScript
- High-Performance Parallel Interface Framing Protocol (HIPPI-FP)
Last modified 01:29:00, 19 Feb 1996 - 82.5K - Portable Document Format
An X3T9.3 maintenance copy of ANSI X3.210-1992.
Abstract: The described protocol provides framing for the
High-Performance Parallel Interface, a simple
high-performance point-to-point interface for transmitting
digital data at peak data rates of 800 or 1600 Mbit/s between
data-processing equipment.
- hippi-fp_4.4.ps
Last modified 22:34:00, 1 Jun 1995 - 280.90234375K - PostScript
- hippi-fp_amend_a.ps
Last modified 22:34:00, 1 Jun 1995 - 70.3K - PostScript
- hippi-fp_amend_sd-3.ps
Last modified 22:36:00, 1 Jun 1995 - 73.4K - PostScript
- hippi-ipi-0194.ps
Last modified 22:36:00, 1 Jun 1995 - 1.5M - PostScript
- High-Performance Parallel Interface - Encapsulation of ISO
8802-2 (IEEE Std 802.2) Logical Link Control Protocol Data
Units (802.2 Link Encapsulation) (HIPPI-LE)
Last modified 01:29:00, 19 Feb 1996 - 60.9K - Portable Document Format
This is an X3T9.3 maintenance copy of ANSI X3.218-1993.
- hippi-le_3.4.ps
Last modified 22:37:00, 1 Jun 1995 - 175.8935546875K - PostScript
- hippi-mi_2.6.ps
Last modified 22:34:00, 1 Jun 1995 - 386.1787109375K - PostScript
- High-Performance Parallel Interface - Multiple Path (HIPPI-MP)
Last modified 12:09:00, 11 Apr 1996 - 49.2K - Portable Document Format
Abstract: This standard specifies the formats and procedures for the
segmentation and reassembly of large upper-layer protocol
data units for transmission over multiple High-Performance
Parallel Interface - Framing Protocol (HIPPI-FP)
lower-layer protocol instances. Single HIPPI interfaces
support 800 or 1600 Mbit/s data transfer rates; HIPPI-MP
allows multiple interfaces to be ganged together for even
higher data transfer rates. NOTE: This is an internal
working document of X3T11, a Technical Committee of
Accredited Standards Committee X3. As such, this is not a
completed standard. The contents are actively being modified
by X3T11. This document is made available for review and
comment only.
Author: Carl Zeitler (zeitler@ausvm6.vnet.ibm.com), IBM Corporation, MS 9440, 11400 Burnet Road,
Austin, TX 78758, USA; Tel: +1 512 838-1797; FAX: +1 512 838-3822
- hippi-mp_0.1.ps
Last modified 12:09:00, 11 Apr 1996 - 112.359375K - PostScript
- hippi-ph_8.2.ps
Last modified 22:33:00, 1 Jun 1995 - 711.177734375K - PostScript
- High-Performance Parallel Interface - Mechanical, Electrical,
and Signalling Protocol Specification (HIPPI-PH)
Last modified 01:29:00, 19 Feb 1996 - 217K - Portable Document Format
A mainteancne copy of ANSI X3.183-1991.
Abstract: The described High-Performance Parallel Interface
(HIPPI-PH) is intended as the physical layer of an
efficient simplex high-performance point-to-point interface
for transmitting digital data at peak data rates of 800 or
1600 Mbit/s between data-processing equipment using multiple
twisted-pair copper cabling at distances up to 25 m.
- High-Performance Parallel Interface - Physical Switch Control (HIPPI-SC)
Last modified 01:39:00, 19 Feb 1996 - 74.6K - Portable Document Format
A maintenance copy of ANSI X3.222-1993. Sept 28, 1995.
Abstract: This standard provides a protocol for controlling
physical layer switches which are based on the
High-performance Parallel Interface, a simple
high-performance point-to-point interface for transmitting
digital data at paek data rates of 800 or 1600 Mbit/s between
data-processing equipment.
- hippi-sc_3.0.ps
Last modified 01:39:00, 19 Feb 1996 - 139.4833984375K - PostScript
- Changes between HIPPI-SC Rev 2.9 and Rev 3.0
Last modified 01:39:00, 19 Feb 1996 - 6.2K - Portable Document Format
- hippi-sc_3.0_changes.ps
Last modified 01:39:00, 19 Feb 1996 - 16.6K - PostScript
- High-Performance Parallel Interface - Serial Specification V2.2 (HIPPI-Serial)
Last modified 15:21:00, 25 Jan 1996 - 119.875K - Portable Document Format
This is a working draft proposed ANSI standard.
December 18, 1995. NOTE: This is an internal working
document of X3T11, a Technical Committee of Accredited
Standards Committee X3. As such, this is not a completed
standard. The contents are actively being modified by X3T11.
This document is made available for review and comment only.
Abstract: This standard specifies a physical-level interface for
transmitting digital data at 800 Mbit/s or 1600 Mbit/s
serially over fiber-optic or coaxial cables across distances
of up to 10 km. The signalling sequences and protocol used
are compatible with HIPPI-PH, ANSI X3.183-1991, which is
limited to 25m distances. HIPPI-Serial may be used as an
external extender for HIPPI-PH ports, or may be integrated as
a host's native interface without HIPPI-PH.
Author: Don Tolmie (det@lanl.gov), Los Alamos National Laboratory, CIC-5,
MS-B255, Los Alamos, NM 87545, USA; Tel: +1 505 667-5502; FAX: +1 505 665-7793
- hippi-serial_2.2.ps
Last modified 15:22:00, 25 Jan 1996 - 271.47265625K - PostScript
- Changes between HIPPI-Serial Rev 2.1 and Rev 2.2
Last modified 15:22:00, 25 Jan 1996 - 2.5K - Portable Document Format
All of the changes were essentially editorial in nature
although some of them changed the technical content as well.
The changes clarify and correct the document.
- hippi-serial_2.2_changes.ps
Last modified 15:23:00, 25 Jan 1996 - 10.8K - PostScript
- hippi_and_fc_coexistence.ps
Last modified 22:37:00, 1 Jun 1995 - 483.5322265625K - PostScript
- hippi_ip_survey_9403.ps
Last modified 22:34:00, 1 Jun 1995 - 112.3759765625K - PostScript
- hippi_ip_survey_9403.txt
Last modified 22:36:00, 1 Jun 1995 - 50.9K - text
Summary of responses to a query that sent to find out
how to implement "IP and ARP on HIPPI".
Author: Lansing Sloan (ljsloan@llnl.gov)
- hippifc.zip
Last modified 04:00:00, 20 Jan 1996 - 396.8759765625K - (pk)zipped
PKzipped hippifc.ps file. No comments or any indication
what it is without printing or previewing. 6.1M in size unzipped.
- minutes/
directory
Minutes of HIPPI meetings.
- IP and ARP on HIPPI (RFC 1374)
Last modified 22:34:00, 1 Jun 1995 - 98.5K - text
Describes transport of IP datagrams
and ARP messages over HIPPI. This is identical to the RFC stored
at archive sites elsewhere and is provided here for convenience.
- sgi_hippi-6400.ps
Last modified 17:38:00, 22 Jan 1996 - 187.2197265625K - PostScript