From: "alan garrett" Newsgroups: comp.sys.transputer Subject: Re: Need help with INMOS transputer system Date: Tue, 27 Oct 1998 10:19:05 -0000 Organization: http://www.supernews.com, The World's Usenet: Discussions Start Here Message-Id: <7146ks$nmq$1@supernews.com> References: <70l6va$3k3$1@supernews.com> Daniel, The SIMM TRAM is a design we originally created, but it was specific for a particular customer so it never became documented as a general purpose design would be. I had a quick word with the person who designed the board and he gave me this info. 1) The slots are paired 2) The last used pair may contain a single stick in the lowest slot. 3) Memory in a pair of slots must be the same 4) fill memory in from lowest no. to highest no. 5) fill memory with largest size in lowest slots if using dissimilar size sticks 6) only 8/16/32 M sticks are identified Last night I should have pointed you towards Andy Ratbag's site but I could not find it . So I posted the binaries to this n/g. My appologies to any other user for posting binaries to this n/g I meant to send them direct to daniel but did it from the wrong context consequently they ended up in the n/g. Hope this helps, Alan