Newsgroups: comp.sys.transputer From: Christoph Niemann Subject: Re: linux driver for the b008/b004 Organization: Ruhr-Universitaet Bochum, Rechenzentrum Date: 16 Mar 1998 07:29:02 GMT Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 8bit Message-ID: <6eikbu$b7c$1@sun579.rz.ruhr-uni-bochum.de> In comp.sys.transputer Uwe Bonnes wrote: : Alex Stuebinger wrote: : : Hi all, : : I have two isa b008 at ports 0x150 and 0x200 and I am looking : : for linux drivers which are newer than those on the hensa archive. : : Can I get these working parallel in linux? : : The system is fine on NT 4.0 with Ingo Mohnen's excellent nt-driver. : : I employ both cards simultaneously, the drivers are interrupt driven : : and do not poll. Therefore system performance is not reduced. : : Has anyone a hint to a ftp-site or a website for download the linux : : drivers? : Hallo, : look with archie etc for "transputer-08b.tar.gz". Or ftp to ftp.swt.ruhr-uni-bochum.de/pub/linux/transputer : I have some patches to compile it under 2.0.3x and to compile it as a : module. Ask me again, if you need these patches. I didn't test with : interrupts. If there is still some interest in the driver, I can make a new release that supports 2.0.x and 2.1.x. Please email me. I never had a real B008 board, so it might be some work to get it running using interrupts. -- ============================================================================== Christoph Niemann niemann@swt.ruhr-uni-bochum.de Lehrstuhl fuer Software-Technik Christoph.Niemann@linux.org Ruhr-Universitaet Bochum, Geb. IC3/36 Tel.: 0234/700-7982 D-44780 Bochum Fax.: 0234/7094-427