Newsgroups: comp.sys.transputer From: Eduardo Jacob Reply-To: jtpjatae@aintel.bi.ehu.es Subject: Re: Info on Transputer ISA Board Organization: ETSII y de IT Bilbao, UPV/EHU, SPAIN Date: Tue, 17 Feb 1998 17:39:29 +0100 Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <34E9BD41.BBE43CAE@bicc00.bi.ehu.es> Alexander Stuebinger wrote: > with regard to the ispy error: > > The effect has nothing to do with transputers or the b008. > Andy Rabagliaty pointed out to me that they are time-out loops > in the newer versions of ispy. > The code doesn't work on fast pentiums or pentium 2's because of this. > I have had the same problem with my pentium2 / 300 MHz. > > As a solution try the older version of ispy. These are the ones which > end in -4: ispy4.exe mtest4.exe ftest4.exe. Yes, that happened!! With that version this is what I get, after redirecting to mtest4. ispy 2.33 | mtest 2.11 # Part rate Mb Bt [ Link0 Link1 Link2 Link3 ] RAM,cycle 0 T800d-20 0.23 0 [ HOST 1:1 ... ... ] 4K,1+28K,3+2016K,4+4K,3; 1 T2 -17 0.55 1 [ ... 0:1 ... C004 ] 2K,1. This is fine. Now the only problem is that I don't see any of the other TRAMS that populate the board. I think it's related to the other pins. Once I get this working I would ony need the soft, but that's another history. Eduardo