Newsgroups: comp.sys.transputer From: pete Reply-To: pete@feeney.co.uk Subject: Re: Info on Transputer ISA Board Organization: Posted via VBCnet GB Ltd Date: Mon, 16 Feb 1998 10:57:44 +0000 Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <34E81BA8.42F523E3@feeney.co.uk> according to various sources the dip switch is the same for all pete i.h. van der molen wrote: > In article <34E60051.14E7D2E@kender.es> Edu writes: > >From: Edu > >Subject: Info on Transputer ISA Board > >Date: Sat, 14 Feb 1998 21:36:34 +0100 > > > I have been given what appears a PC-Based Transputer Development > >Board. It is a IMS B008 Rev E. It's a long board with a 9 sockets. > >Numbers 1,5,6 and 7 are free. 2 and 3 there is a IMS T805 Transputer > >with what seems 8 vram or so modules. There is a double module over 0 > >and 4 socket with a IMS T800D with 16 modules of VRAM. sockets 8 and 9 > >are populated directly on the board with two other chips. I've al least > >other 2 modules with a IMS T805. > > > I haven't received any documentation or software. > > > > > I have got a similar problem. I have got documentation of an other > board revision, and the dipswitch settings doesn't match. Has anyone got the > correct dipswitch settings for a rev. E B008 board ? > > Greetings, > Ids.